The directions are a general guide only.
1 Blot up excess stain deposits with a clean white cloth.

2 Lightly spray CouchGuard® Fabric Spotter onto effected area. Do not over wet. Lightly agitate and allow to dwell for 5 minutes.

3 In a clean bucket or container add 30ml of CouchGuard® Rinse Aid to 1 litre of clean water.

4 Dampen a white cloth in the clean water and blot away the stain. Rinse the cloth in the clean water and repeat blotting working in a twisting circular motion around and into the stain. DO NOT RUB

5 Repeat if necessary.

6 Use a clean white cloth to blot away any excess moisture.

7 Once dry and stain removed, vacuum away any residue then apply CouchGuard® Fabric Protector by lightly misting the area. Allow to dry and repeat. DO NOT OVER WET.

Always Test In A Small Hidden Area

1 Add 30ml into 1 litre of clean water.

2 Dampen white cloth in the clean water and blot away spills.

3 Use a dry white cloth to blot up any excess moister.

4 For stubbing spills or stains use CouchGuard® Fabric Spotter as per directions.

SURFACE PREPARATION

The surface must be clean, dry and free of dirt, dust, contaminants, stains and coatings.
Standard surface preparation can be used. Dirt and algae invested substrates should be cleaned with suitable cleaner or pressure water. Water pressure must be suitable for the substrate.

CouchGuard® Nano Shield Fabric Protection Directions, 250ml and 500ml:

1 Evenly spray a wet coat of CouchGuard Nano Shield® Fabric Protector onto selected area.
2 Repeat once using a different spray pattern to maximise even coverage.

Two coats wet on wet must be applied to ensure full coverage.

CouchGuard® Nano Shield Fabric Protection Directions 1lt to 5lt:

1 If the couches are on timber or tiled floors, place a drop sheet or old towels around to protect the floor coverings. (not supplied)
2 First test the battery sprayer with water to adjust the spray pattern. You can do this by placing the pick up tube into the sink or a bucket before connecting to the fabric protection bottle.
3 Testing on a cloth or towel, adjust the fan width by turning the white adjustor on the sprayer. You want a wide even mist.
4 Evenly spray CouchGuard® Fabric Protector onto the couch in one direction.

5 Repeat once using a different spray pattern to maximise even coverage.

Two coats wet on wet must be applied to ensure full coverage.

COUCHGUARD NANO SHIELD® is not classified as dangerous goods.
Protective personal equipment should be used when applying the product.

Warning: Always test on a small hidden are before use.