electric recliner motor, couchguard

Electric Recliner Motor Kit - Clearance

Only 25 left in stock
Not rated yet
Free shipping
  • Complete Kit Includes
  • 1 x Actuator 535mm
  • 1 x Power Supply Kit
  • 1 x Round Button

Compatible With JLDQ-1a, JLDQ-11 plus more. See list below

CLEARANCE - NON RETURNABLE - 30 ONLY

  • $139.00
  • Old price: $255.95 , you save $116.95
    • 46% off
Qty:  
  • Weight
    3.1 kg
  • SKU
    CGACT-535-Clearance

Clearance Stock - NON RETURNABLE

Electric Recliner Motor kit. This comes with 535mm industry standard length actuator with "0l" power lead and 8pin female plug built into the body. It also includes the 8pin Round Button switch, Power Supply and AU Power Lead.

This is a complete kit and must be used as the kit. NOT SOLD separately.

535mm Actuator - Compatible with but not limited to the Okin Betadrive, Timotion TA5, TA25, Okin Refind-R JLDQ-1a, JLDQ-11, JLDQ.1.156.33, JLDQ.12.133.226C plus more if you have to round button switch only. 

Please compare yours to our images and check the Data Spec Sheet for measurements.

  • Brand
    CouchGuard®
  • Options
    Actuator Kit - 535mm - Clearance Non Returnable
  • 8 pin Plug
    Yes - Round Button Only
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment

Removing & Fitting A Actuator

1 Place a drop sheet or old towels around the recliner.

2 Turn off and remove the power supply plug from the mains.

3 Gently turn the recliner over onto its side or on its back. Remember correct lifting methods.

4 Locate the component and its lead. Follow the lead along to the plug ends remembering where it runs.

5 Using a pair of side cutters, snip the cable ties that are retaining the lead to the frame.

6 Loctate the two mounting pins and clips that hold the motor to the frame. Remove the wire retaining clips from the pins using a pair of pointy noise pliars. Hold the motor and remove the pins.

7 Place the new motor assmebly into position. Replace the pins through the mounting holes and attach the wire clips.

8 Plug in all leads and run them along the frame. Check that all leads are out of the way of moving parts. Cable tie the leads back to the frame.

9 Turn the recliner back over to normal seating position

10 Plug the main power supply back into the wall.

11 Test the new component. Operate the lift chair recliner to its fullest position and check that all the leads are clear and not stretched.

12 Return the lift chair to its normal seating position.

Tip: Check that all the leads are cable tied away from moving parts before turning the power supply back on. Leads can sometimes get jammed between moving parts causing a dead short after the chair is moved.

DO NOT exceed more then 2 mins operating time at anyone time.

If you do exceed this time, wait 20 mins before using again.

Universal Actuator Measurements

The universal actuators have an overall length of 535mm and a stroke of 340mm. This is industry standard and also has then "0I" power lead plus contains the female 8 pin plug mounted in the body of the motor. This overall measurement is from the center of the clevis pin mounting hole to the center of the mounting nut on the opposite end. Please refer to our Data Spec Sheet. The stroke is the distance the white plastic guide travels . This kit also comes with a 1 year warranty.

Clearance Actuator Kit Contains

Actuator:
x 1
0I Extension Cable:
x 1
Power Supply:
x 1
Power Cable:
x 1

535mm Clearance Actuator Specifications

Input Voltage:
24V DC
Max Load Capacity:
750N (100kgs)
Max Speed:
30mm/s
Std Stroke:
340mm
Overal Length:
535mm
Limit Switch:
Inner
Type Of Duty:
S2 - 10mins
Protection Class:
IP43
Cercification:
CE / EMC+LVD

All recliner parts are universal. Makes of recliners, brand names or manufactures part numbers don't mean much to us.

Customers who bought this product also bought

Drop items here to shop
Product has been added to your cart

Customers who viewed this product bought