Power Recliner Switch Oval
Electric Recliner Button
CouchGuard® for electric recliner parts like the electric recliner button replacement is oval in shape and comes with the standard right angled 5 pin male plug round ready to post.
Buy Genuine Okin Parts From CouchGuard®
|1-3 items||$35.95 / each|
|4-5 items||$32.35 / each||save 10.01%|
|6-9 items||$28.76 / each||save 20%|
|10 or more items||$21.57 / each||save 40%|
Universal oval recliner switch with standard 5 Pin right angled Plug. Buy from an Australian Owned Company.
Genuine Okin button 1.65-016.30UJ22J
Round Button Control
- 2 up and down
- STD 5 pin round right angle
All recliner parts are universal. Makes of recliners, brand names or manufactures part numbers don't mean anything.
Removing & Fitting General Electrical Components
1 Place a drop sheet or old towels around the recliner.
2 Turn off and remove the power supply plug from the mains.
3 Gently turn the recliner over onto its side or on its back. Remember correct lifting methods.
4 Locate the component and its lead. Follow the lead along to the plug end remembering where it runs.
5 Using a pair of side cutters, snip the cable ties that are retaining the lead to the frame.
6 Unplug the socket and remove the old component. Place the new component lead along the same path as the old and cable tie the new lead to the frame.
7 Check all other leads are out of the way of moving parts.
8 Turn the recliner back over to normal seating position
9 Plug the main power supply back into the wall.
10 Test the new component. Operate the lift chair recliner to its fullest position and check that all the leads are clear and not stretched.
11 Return the lift chair to its normal seating position.
DO NOT exceed more then 2 mins operating time at anyone time.
If you do exceed this time, wait 20 mins before using again.