CouchGuard® stock the eMoMo RemoP10 USB power recliner button that will fit most electric recliner chairs. The power recliner switch with USB is round in shape, has a built in control box and comes with the standard right angled 5 pin male plug. Easy to fit.
Buy Genuine eMoMo Tech Parts From CouchGuard®
- Brand: eMoMo
|1-3 items||$44.95 / each|
|4-5 items||$40.45 / each||save 10.01%|
|6 or more items||$35.96 / each||save 20%|
eMoMo Power recliner switch RemoP10 with USB from CouchGuard is round in shape and comes in black plastic with industry standard 5 pin plug, right angled. This plug will also fit the straight plug 5 pins.
To find which version of RemoP power recliner switch you have, you'll need to look for the following on each of the products.
RemoP10 - Has a control box with a serial number on the side starting with SN: EP10
RemoP20LR U - Has the serial number on the back of the switch itself and starts with SN: WTP20LRU
RemoP20LR - Has a control box with a switch A-B on the front and a serial number starting with SN: EP20LR
Round Button Control
- 2 up and down
- STD 5 pin round right angle
All recliner parts are universal. Makes of recliners, brand names or manufactures part numbers don't mean anything.
Removing & Fitting General Electrical Components
1 Place a drop sheet or old towels around the recliner.
2 Turn off and remove the power supply plug from the mains.
3 Gently turn the recliner over onto its side or on its back. Remember correct lifting methods.
4 Locate the component and its lead. Follow the lead along to the plug end remembering where it runs.
5 Using a pair of side cutters, snip the cable ties that are retaining the lead to the frame.
6 Unplug the socket and remove the old component. Place the new component lead along the same path as the old and cable tie the new lead to the frame.
7 Check all other leads are out of the way of moving parts.
8 Turn the recliner back over to normal seating position
9 Plug the main power supply back into the wall.
10 Test the new component. Operate the lift chair recliner to its fullest position and check that all the leads are clear and not stretched.
11 Return the lift chair to its normal seating position.
DO NOT exceed more then 2 mins operating time at anyone time.
If you do exceed this time, wait 20 mins before using again.