eMoMo RemoP20LR

Not rated yet

CouchGuard® stock the eMoMo RemoP20LR USB power recliner button that will fit most electric recliner chairs. The power recliner switch with USB is round in shape, has a built in control box and comes with the standard right angled 5 pin male plug. Easy to fit.

Please note, this replacement switch is not compatible with the eMoMo Tech - RemoP10 or RemoP20LR U

Buy Genuine eMoMo Tech Parts From CouchGuard®

  • Brand: eMoMo
Buy more for less:
1-3 items $44.95 / each  
4-5 items $40.45 / each save 10.01%
6 or more items $35.96 / each save 20%
  • $44.95
Qty:  
In stock (10 items available)

eMoMo Power recliner switch RemoP20LR with USB from CouchGuard is round in shape and comes in black plastic with industry standard 5 pin plug, right angled. This plug will also fit the straight plug 5 pins.

To find which version of RemoP power recliner switch you have, you'll need to look for the following on each of the products.

RemoP20LR - Has a control box with a switch A-B on the front and a serial number starting with SN: EP20LR

RemoP20LR U - Has the serial number on the back of the switch itself and starts with SN: WTP20LRU

RemoP10 - Has a control box with a serial number on the side starting with SN: EP10

    • Weight
      0.45 kg
    • SKU
      EMO-REMOP20LR
  • Brand
    eMoMo
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment

Round Button Control

Buttons:
2 up and down
Plug:
STD 5 pin round right angle
Cable:
Straight

All recliner parts are universal. Makes of recliners, brand names or manufactures part numbers don't mean anything.

Removing & Fitting General Electrical Components

1 Place a drop sheet or old towels around the recliner.

2 Turn off and remove the power supply plug from the mains.

3 Gently turn the recliner over onto its side or on its back. Remember correct lifting methods.

4 Locate the component and its lead. Follow the lead along to the plug end remembering where it runs.

5 Using a pair of side cutters, snip the cable ties that are retaining the lead to the frame.

6 Unplug the socket and remove the old component. Place the new component lead along the same path as the old and cable tie the new lead to the frame.

7 Check all other leads are out of the way of moving parts.

8 Turn the recliner back over to normal seating position

9 Plug the main power supply back into the wall.

10 Test the new component. Operate the lift chair recliner to its fullest position and check that all the leads are clear and not stretched.

11 Return the lift chair to its normal seating position.

Tip: Check that all the leads are cable tied away from moving parts before turning the power supply back on. Leads can sometimes get jammed between moving parts causing a dead short after the chair is moved.

DO NOT exceed more then 2 mins operating time at anyone time.

If you do exceed this time, wait 20 mins before using again.

Related products

Customers who viewed this product bought