Compatible KDPT007-11 Actuator

Only 3 left in stock
FREE Postage On This Item
Not rated yet

Electric Recliner Motor Parts 

Compatible KDPT007-11 electric recliner motor. The actuator as it is known, comes in the standard industry length 535mm and is also available as a kit which contains the actuator power supply, extension cable and the figure 8 power cable.  This same actuator can be used for the Okin Refind-R JLDQ-12.157.33P, Kaidi KDPT007-11 and Mulin ML8-205. Scroll down or swipe up to discover more  

We also provide a 1 year warranty on ALL our electric recliner parts. Australian Owned Company

Select YOUR option from the drop down menu here: 

  • Old price: $220.00 , you save $22.00
  • $198.00
    • 10% off
Buy more for less:
1 items $198.00 / each  
2 or more items $145.35 / each save 27%
Qty:  
  • Weight
    3.1 kg
  • SKU
    CGACT-KDPT007-11

Mulin ML8-205 - Actuator With Headrest Power Wire option

Also Compatible with but not limited too:

Okin Refined-R JLDQ.12.157.333P

Kaidi KDPT007-11 

  • Brand
    CouchGuard®
  • Options
    Actuator Only - Compatible with KDPT007-11, Actuator Only - ML8-205, Actuator Only - Compatible with JLDQ.12.157.333P, Kit Form - Compatible with KDPT007-11, Kit Form - Compatible with JLDQ.12.157.333P, Kit Form - ML8-205
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment

Removing & Fitting A Actuator

1 Place a drop sheet or old towels around the recliner.

2 Turn off and remove the power supply plug from the mains.

3 Gently turn the recliner over onto its side or on its back. Remember correct lifting methods.

4 Locate the component and its lead. Follow the lead along to the plug ends remembering where it runs.

5 Using a pair of side cutters, snip the cable ties that are retaining the lead to the frame.

6 Loctate the two mounting pins and clips that hold the motor to the frame. Remove the wire retaining clips from the pins using a pair of pointy noise pliars. Hold the motor and remove the pins.

7 Place the new motor assmebly into position. Replace the pins through the mounting holes and attach the wire clips.

8 Plug in all leads and run them along the frame. Check that all leads are out of the way of moving parts. Cable tie the leads back to the frame.

9 Turn the recliner back over to normal seating position

10 Plug the main power supply back into the wall.

11 Test the new component. Operate the lift chair recliner to its fullest position and check that all the leads are clear and not stretched.

12 Return the lift chair to its normal seating position.

Tip: Check that all the leads are cable tied away from moving parts before turning the power supply back on. Leads can sometimes get jammed between moving parts causing a dead short after the chair is moved.

DO NOT exceed more then 2 mins operating time at anyone time.

If you do exceed this time, wait 20 mins before using again.

Related products

Drop items here to shop
Product has been added to your cart

Customers who viewed this product bought

Customers who bought this product also bought