Directions

1 Lightly sand area to be repaired with 400g paper, then clean using CouchGuard® Leather Prep.

2 Using a spatula, apply a thin coat of CouchGuard® Leather Filler. The filler can either be left to air dry (approximately 60mins) or can be dried with a heat gun or hairdryer from approximately 30cm, then the filler can be sanded (if needed) and another coat applied.

Please Note: 

Too much filler at once will take for ever to dry and shrink back. 

Too much heat may make the filler bubble. 2-3 coats maybe needed to achieve a desired finish.

Adhesion on oil soak leather may also be an issue.

FAQ'S

Q. I have badly worn / cracked seating cushion. Can I use your products to repair and recolour this damage?

A. Yes and No. Not all leather is repairable as such. Generally the seating areas along with the arm and headrest areas are damaged from body oils, perspiration etc. The leather has absorbed these contaminates over the years so getting a permeant repair is near impossible. Adhesion may / will be an issue or those areas will crack again with little use.

If you do go ahead and repair badly damaged areas and the repairs fail, please don't blame our products when this happens.