6 Button Hand Control
The 6 button lift chair controller operates a two actuator lift chair were you can adjust both the back rest and recliner to different positions and comes with the 5 pin plug. We also have the Genuine Okin hand control - 1.42.000.163.30
Select YOUR option from the drop down menu here:Â
CouchGuard® have the Genuine Okin hand control - 1.42.000.163.30 in stock plus compatible universal 6 button as well. The 6 button controller operates a twin actuator lift chair were you can adjust both the back rest and recliner to different positions and comes with the 5 pin plug. This plug end is the industry standard 5 pin plug and fit 99% of their recliners on the market.
Some people say the universal is a 4 button but look closely and you'll see there are two buttons in the middle!
-
BrandCouchGuard®
-
OptionsHand Control Only - Universal, Hand Control With Extension Lead - Universal, Genuine Okin - 1.42.000.163.30
Okin Hand Control
- Buttons:
- 2 up and down
- Plug:
- STD 5 pin round
- Cable:
- Coiled
All recliner parts are universal. Makes of recliners, brand names or manufactures part numbers don't mean anything.
Removing & Fitting General Electrical Components
1 Place a drop sheet or old towels around the recliner.
2 Turn off and remove the power supply plug from the mains.
3 Gently turn the recliner over onto its side or on its back. Remember correct lifting methods.
4 Locate the component and its lead. Follow the lead along to the plug end remembering where it runs.
5 Using a pair of side cutters, snip the cable ties that are retaining the lead to the frame.
6 Unplug the socket and remove the old component. Place the new component lead along the same path as the old and cable tie the new lead to the frame.
7 Check all other leads are out of the way of moving parts.
8 Turn the recliner back over to normal seating position
9 Plug the main power supply back into the wall.
10 Test the new component. Operate the lift chair recliner to its fullest position and check that all the leads are clear and not stretched.
11 Return the lift chair to its normal seating position.
DO NOT exceed more then 2 mins operating time at anyone time.
If you do exceed this time, wait 20 mins before using again.
FAQ's
Q. My hand control is from a genuine Lazy Boy and has a different plastic outer on the 5 pin plug?
A. You will need to order the hand control with the extension cable and replace the complete unit. The extension cable has the same right angled 5 pin plug.
Q. The 5 pin plug on my hand control has the V shape on the outer metal circle of the 5 pin plug?
A. Some do and some don't. Ours don't but thats what makes them universal. Its just for aligning the pins up!Ă‚Â
Q. My hand control has a right angle plug?
A. Thats fine. Just order the hand control with the extension cable. It has a right angle plug end.