Lift Chair Actuator Kit
Lift chair Motor
CouchGuard® have put together a lift chair recliner motor kit. This retro fit kit replaces all the electrics in your lift chair, has a powerful 10mm/s with a 600kg push / pull capacity. Compatible with the T-Motion TA6 series TA6-1053-002, Okin Refined-O Deltadrive 1.28.000.187.30 plus many more. Scroll down to see more.
This kit now comes with an Okin actuator and aftermarket components i.e: power supply, hand control etc.
Lift Chair Replacement Parts
This lift chair actuator kit contains the actuator, power supply, 2 button controller and the figure 8 power cable and will fit 99% of the recliners on the market. We also provide a 1 year warranty.
Compatible with Okin Refined-R JLDQ.10.375.195 plus more
Compatible with but not limited too - Okin Refined-O Deltadrive 1.28.000.187.30, Deltadrive DS1 1.28.000.160.30, 1.28.00.126.30, 1.28.000.100.30, 1.28.000.090.30, Okidrive ES2 1.24.000.129.30 plus more. Looking for Okin Lift Chair Motor Click the link
Compatible with T-Motion TA6 series TA6-1053-002 actuator
Power Wire Only Actuator 210mm Stroke is compatible with but not limited too the Okin DeltadriveDZ 1.22.00.918.30, 1.22.000.749.30
Use the Complete Actuator Kit in replacement of the Dewert Megmat 000.870.177 or we can order a genuine Dewert Actuator here.
-
BrandCouchGuard®
-
OptionKit Form - 207mm Stroke - 387mm, Actuator Only - 220mm Stroke - 375mm, Y Cable Replacement - 0I male and 5pin female, Power Wire Only Actuator - 220mm Stroke - 385mm, Power Wire Only Actuator - 150mm Stroke - 325mm, Power Wire Only Actuator - 100mm Stroke - 275mm
-
Terry ThompsonJan 8, 2021, 02:04 PMCouchGuard were very helpful in being able to provide additional dimension information for products that allowed replacement of recliner parts with non OEM equipment. They provided a very prompt and efficient service.
-
Vincent CaiafaDec 3, 2020, 05:46 AMHi Tim. My order was what I needed. Great unit. Thanks guys for helping me out take care cheers
-
C JohnsonJan 1, 2020, 03:05 PMThank you for sorting this problem out for us, we now have a happy, feet up, 93 year old.
Actuator Kit Contains
- Hand Control:
- x 1
- Okin Actuator:
- x 1
- Power Supply:
- x 1
- Power Cable:
- x 1
210mm Actuator Specifications
- Input Voltage:
- 24V DC
- Max Load Capacity:
- 6000N (600kgs)
- Max Speed:
- 10mm/s
- Std Stroke:
- 210mm - +/- 1mm
- MIN Install:
- 387mm - +/- 1mm
- Limit Switch:
- Inner
- Type Of Duty:
- S2 - 10mins
- Protection Class:
- IP43
- Cercification:
- CE / EMC+LVD
- Power Wire Plug:
- Standard 0I Plug
- Hand Control Plug:
- Female 5 Pin Plug
The single wire actuators run in series and are found on the lift chairs with the 6 button controller. These same actuators can be used in recliners and chaises by adding the adaptor cable to connect the hand control.
150mm Power Wire Only Actuator Specifications
- Input Voltage:
- 24V DC
- Max Load Capacity:
- 1000N (100kgs)
- Max Speed:
- 18mm/s
- Std Stroke:
- 150mm
- MIN Install:
- 325mm
- Limit Switch:
- Inner
- Type Of Duty:
- S2 - 10mins
- Protection Class:
- IP43
- Cercification:
- CE / EMC+LVD
- Power Wire Plug:
- Standard 0I Plug
100mm Power Wire Only Actuator Specifications
- Input Voltage:
- 24V DC
- Max Load Capacity:
- 1000N (100kgs)
- Max Speed:
- 18mm/s
- Std Stroke:
- 100mm
- MIN Install:
- 275mm
- Limit Switch:
- Inner
- Type Of Duty:
- S2 - 10mins
- Protection Class:
- IP43
- Cercification:
- CE / EMC+LVD
- Power Wire Plug:
- Standard 0I Plug
All recliner parts are universal. Makes of recliners, brand names or manufactures part numbers don't mean anything.
Removing & Fitting A Actuator
General Instructions Only
1 Place a drop sheet or old towels around the recliner.
2 Turn off and remove the power supply plug from the mains.
3 Gently turn the recliner over onto its side or on its back. Remember correct lifting methods.
4 Locate the component and its lead. Follow the lead along to the plug ends remembering where it runs.
5 Using a pair of side cutters, snip the cable ties that are retaining the lead to the frame.
6 Loctate the two mounting pins and clips that hold the motor to the frame. Remove the wire retaining clips from the pins using a pair of pointy noise pliars. Hold the motor and remove the pins.
7 Place the new motor assmebly into position. Replace the pins through the mounting holes and attach the wire clips.
8 Plug in all leads and run them along the frame. Check that all leads are out of the way of moving parts. Cable tie the leads back to the frame.
9 Turn the recliner back over to normal seating position
10 Plug the main power supply back into the wall.
11 Test the new component. Operate the lift chair recliner to its fullest position and check that all the leads are clear and not stretched.
12 Return the lift chair to its normal seating position.
DO NOT exceed more then 2 mins operating time at anyone time.
If you do exceed this time, wait 20 mins before using again.
FAQ's
Q. The motor in my lift chair measures 400mm. Will this kit still fit?
A. Yes. You just need to edge the motor out to the desired length then fit the remaining clevis pin.
Q. The stroke on my motor is 207mm?
A. Thats fine. Our motor will still fit ok.
We have a Pride lift chair that the motor has stopped working in. Will this kit fit?
Yes. We have made this kit universal so makes and models don't come into play as you are replacing the complete electrics with the latest on the market. Just check the overall length of the motor is no shorter then ours.