Okin PD12 Power Supply

In stock (11 items available)
Not rated yet

PD12 Okin Power Supply

CouchGuard® stock the Genuine Okin PD12 Power Supply 65444. This lift chair power supply has the "Ol" flat blade / round pin plug and takes the figure 8 power cord as standard. These plug ends are the industry standard and fit 99.9% of the recliners on the market.

We also stock the / \ angled plug 65445. Please check your PD12 power supply carefully before ordering.

"C" Tick Approved - Meets Australian Standards

Select YOUR option from the drop down menu here: 

  • $62.00
  • Weight
    0.5 kg
  • SKU

Okin PD12 Power Supply 65444 has industry standards 29volt - 2.0amp but no battery back up but everything else is the same. Th PD12 65444 has the same specifications but comes with the angled plug / \

  • Brand
  • Options
    PD12 Power Supply Only - 0I Plug, PD12 Power Supply Only - 0I Plug with AU Power Lead, PD12 Power Supply Only - 0I Plug with 0I Extension Lead, Complete - PD12 Power - 0I Plug Supply Kit Form, PD12 Power Supply Only 65445 - / \ Plug, PD12 Power Supply Only 65445 - / \ Plug with AU Power Lead, PD12 Power Supply Only 65445 - / \ Plug with Extension Lead, PD12 Power Supply Only 65445 - / \ Plug Kit Form
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment

PD13 Power Supply Specifications

100 - 240V, 50/60Hz, 1.5amp (Australian figure 8 mains power cord)
DC 29V = 1.5amp
STD 01 female ( O l Plug)
Duty cycle:
Max 10%; Max Time on: 2 min

Removing & Fitting General Electrical Components

1 Place a drop sheet or old towels around the recliner.

2 Turn off and remove the power supply plug from the mains.

3 Gently turn the recliner over onto its side or on its back. Remember correct lifting methods.

4 Locate the component and its lead. Follow the lead along to the plug end remembering where it runs.

5 Using a pair of side cutters, snip the cable ties that are retaining the lead to the frame.

6 Unplug the socket and remove the old component. Place the new component lead along the same path as the old and cable tie the new lead to the frame.

7 Check all other leads are out of the way of moving parts.

8 Turn the recliner back over to normal seating position

9 Plug the main power supply back into the wall.

10 Test the new component. Operate the lift chair recliner to its fullest position and check that all the leads are clear and not stretched.

11 Return the lift chair to its normal seating position.

Tip: Check that all the leads are cable tied away from moving parts before turning the power supply back on. Leads can sometimes get jammed between moving parts causing a dead short after the chair is moved.

DO NOT exceed more then 2 mins operating time at anyone time.

If you do exceed this time, wait 20 mins before using again.

Related products

Drop items here to shop
Product has been added to your cart

Customers who bought this product also bought

Customers who viewed this product bought