Okin PD12 65444 Power Supply
PD12 Okin Power Supply
CouchGuard® stock the Genuine Okin PD12 Power Supply 65444. This lift chair power supply has the "Ol" flat blade / round pin plug and takes the figure 8 power cord as standard. These plug ends are the industry standard and fit 99.9% of the recliners on the market.
We also stock the / \ angled plug PD12 65445. Please check your PD12 power supply carefully before ordering.
"C" Tick Approved - Meets Australian Standards
Select YOUR option from the drop down menu here:
|1-3 items||$60.80 / each|
|4-5 items||$54.72 / each||save 10%|
|6 or more items||$48.64 / each||save 20%|
Okin PD12 Power Supply 65444 has industry standards 29volt - 1.5amp but no battery back up but everything else is the same. Th PD12 65445 has the same specifications but comes with the angled plug / \
OptionsPD12 Power Supply Only - 0I Plug, PD12 Power Supply Only - 0I Plug with AU Power Lead, PD12 Power Supply Only - 0I Plug with 0I Extension Lead, Complete - PD12 Power - 0I Plug Supply Kit Form, _
Angela RustAug 27, 2021, 06:33 AMHi guys, I received my Power supply this afternoon....so quick...I could not believe it. Just thought I would let you know that it works perfectly .
Thank you so much,
Johanna KennedyNov 20, 2020, 01:00 PMI would like to say a big thank you for your help when I ordered the incorrect transformer for our couch. I returned it and you replaced it with the correct one being the PD12. The turnaround was amazing and your assistance was a great help. I will be recommending your company to my friends and family.
PD13 Power Supply Specifications
- 100 - 240V, 50/60Hz, 1.5amp (Australian figure 8 mains power cord)
- DC 29V = 1.5amp
- STD 01 female ( O l Plug)
- Duty cycle:
- Max 10%; Max Time on: 2 min
Removing & Fitting General Electrical Components
1 Place a drop sheet or old towels around the recliner.
2 Turn off and remove the power supply plug from the mains.
3 Gently turn the recliner over onto its side or on its back. Remember correct lifting methods.
4 Locate the component and its lead. Follow the lead along to the plug end remembering where it runs.
5 Using a pair of side cutters, snip the cable ties that are retaining the lead to the frame.
6 Unplug the socket and remove the old component. Place the new component lead along the same path as the old and cable tie the new lead to the frame.
7 Check all other leads are out of the way of moving parts.
8 Turn the recliner back over to normal seating position
9 Plug the main power supply back into the wall.
10 Test the new component. Operate the lift chair recliner to its fullest position and check that all the leads are clear and not stretched.
11 Return the lift chair to its normal seating position.
DO NOT exceed more then 2 mins operating time at anyone time.
If you do exceed this time, wait 20 mins before using again.