Okin PD13 Power Supply

Only 3 left in stock
Not rated yet

PD13 Okin Power Supply

CouchGuard® stock the Genuine Okin PD13 Power Supply. This lift chair power supply has the "O l" flat blade / round pin plug and takes the figure 8 power cord as standard and has provisions for 2 x 9volt batteries - not included. These plug ends are the industry standard and fit 99.9% of the recliners on the market.

"C" Tick Approved - Meets Australian Standards

Select YOUR option from the drop down menu here:

  • $68.99
Qty:  
  • Weight
    0.5 kg
  • SKU
    CGEPS-PD13

The 9v battery back up option is generally good for one use only then the batteries need replacing.

  • Brand
    Okin
  • Options
    PD13 Power Supply Only with 9v Battery Back Up, PD13 Power Supply Only with 9v Battery Back Up Plus AU Power Lead, PD13 Power Supply Only with 9v Battery Back Up Plus 0I Extension Lead, Complete - PD13 Power Supply 9v Back Up Kit Form, 0I Extension Lead - 1.0 Meter, Figure 8 Lead, Y Splitter
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment

PD13 Power Supply Specifications

Input:
100 - 240V, 50/60Hz, 1.5amp (Australian figure 8 mains power cord)
Output:
DC 29V = 1.5amp
Plug:
STD 01 female ( O l Plug)
Duty cycle:
Max 10%; Max Time on: 2 min

Removing & Fitting General Electrical Components

1 Place a drop sheet or old towels around the recliner.

2 Turn off and remove the power supply plug from the mains.

3 Gently turn the recliner over onto its side or on its back. Remember correct lifting methods.

4 Locate the component and its lead. Follow the lead along to the plug end remembering where it runs.

5 Using a pair of side cutters, snip the cable ties that are retaining the lead to the frame.

6 Unplug the socket and remove the old component. Place the new component lead along the same path as the old and cable tie the new lead to the frame.

7 Check all other leads are out of the way of moving parts.

8 Turn the recliner back over to normal seating position

9 Plug the main power supply back into the wall.

10 Test the new component. Operate the lift chair recliner to its fullest position and check that all the leads are clear and not stretched.

11 Return the lift chair to its normal seating position.

Tip: Check that all the leads are cable tied away from moving parts before turning the power supply back on. Leads can sometimes get jammed between moving parts causing a dead short after the chair is moved.

DO NOT exceed more then 2 mins operating time at anyone time.

If you do exceed this time, wait 20 mins before using again.

Related products

Drop items here to shop
Product has been added to your cart

Customers who viewed this product bought

Customers who bought this product also bought