USB Recliner Switch
Power Recliner Switch with USB
Universal power recliner button. Fits many makes and Model recliners. Comes with industry standard 5pin plug. Compatible with the Okin USB with plus the Kaidi KDH019-304 and KDH018-305
All our electrical recliner parts come with a 12 month warranty.
CouchGuard® is an Australian Owned Company
|1-3 items||$45.00 / each|
|4-5 items||$40.50 / each||save 10%|
|6 or more items||$36.00 / each||save 20%|
CouchGuard® stock a Power Recliner Switch in Stainless Steel. This switch has the industry standard 5 Pin Plug and fits with many makes and model electric recliners.
Round Button Control
- 2 - up and down
- STD 5 pin round straight plug
All recliner parts are universal. Makes of recliners, brand names or manufactures part numbers don't mean anything.
Removing & Fitting General Electrical Components
1 Place a drop sheet or old towels around the recliner.
2 Turn off and remove the power supply plug from the mains.
3 Gently turn the recliner over onto its side or on its back. Remember correct lifting methods.
4 Locate the component and its lead. Follow the lead along to the plug end remembering where it runs.
5 Using a pair of side cutters, snip the cable ties that are retaining the lead to the frame.
6 Unplug the socket and remove the old component. Place the new component lead along the same path as the old and cable tie the new lead to the frame.
7 Check all other leads are out of the way of moving parts.
8 Turn the recliner back over to normal seating position
9 Plug the main power supply back into the wall.
10 Test the new component. Operate the lift chair recliner to its fullest position and check that all the leads are clear and not stretched.
11 Return the lift chair to its normal seating position.
DO NOT exceed more then 2 mins operating time at anyone time.
If you do exceed this time, wait 20 mins before using again.