Buy Figure 8 Power Lead - AU

Figure 8 Power Lead with Australian Three-Pin Plug

Connect a compatible power supply to an Australian wall outlet with this approximately 1.2 m figure-eight mains lead. One end has an Australian three-pin plug; the other has the figure-eight (IEC C7) connector shown in the photos. Check that the input connection on your power supply matches the pictured connector before ordering.

What to check before buying

• Power-supply inlet: It must match the figure-eight connector shown at the end of this lead in the close-up photos. A different-shaped inlet needs a different lead.
• Wall plug: This lead has an Australian three-pin plug.
• Length: Approximately 1.2 m, as supplied by CouchGuard.
• Electrical suitability: Check the markings on your original lead and power supply, and follow the equipment manufacturer's instructions. Do not force a connector into an inlet.

The close-up images show the connector from both sides and the three-pin plug. An embossed C-Tick mark is visible on the connector housing; the photograph is not a substitute for compliance documentation.

Frequently asked questions

Will it fit my recliner power supply? It may, if your power supply has the same figure-eight input connection shown at the end of this lead and the lead is suitable for your equipment. Match the inlet rather than relying on the power-supply brand alone.

Does it fit every power supply? No. Power supplies can use different mains inlets. Compare your existing lead and the power-supply inlet with the pictured connector.

How long is the lead? Approximately 1.2 m. If reach is critical, measure the route from your wall outlet to the power supply before ordering.

Reach out to our team today by calling 1300 268 244 or emailing info@couchguard.com.au