Okin Battery Pack – 2550mAh

$245.00

The Okin Battery Pack 2550mAh has an internal charging board which means the standard recliner power supply is all that is need to recharge the power pack.

Just like the Okin Battery Pack 1800mAh, it can be used inline with any lift chair or electric recliner with the 0l plug, for when the mains power fails or as an off the grid solution such as no power point in the middle of the room for your electric recliner.

To install this battery pack, simply disconnect the 0l extension lead between your current power supply and the actuator and plug this in. Thats the lead that runs to the chair from the power supply. Please see additional images and read the information in the below tabs regarding battery fitting. You do not need a seperate power supply kit unless you are upgrading from the old Kaidi-KDDY022-2600 battery pack which has a round 6 pin connection on the input side of the battery.(All parts are sold separately)


All you need to do is compare your plug to our industry standard 0l (oh one) plug in the image and yes the battery pack will fit your brand of recliner.

Also a great combination to add is our Battery Isolating Switch to allow longevity of the battery between charges as easy as a click, Click Here.

This product can only be sold to AUSTRALIAN customers.

SKU OKIN-JLDP.11.014.000 Categories , Tags , , Brand: okin logo phoenix mecanoOkin

Description

Okin Battery Pack

The 2550mAh Battery Pack has protection measures builtin such as LED charge status indicator and an audible warning signal when there is a low residual charge. Several safety functions are also on board, including electronic overload cut-off, a short-circuit and deep discharge protection.

Over Charge

Power pack shutoff automatically, when the charging voltage of the integrated power pack is higher than 29.7V±0.3V, or the charging voltage of battery cell is higher than 4.25V,LED turns green. Power pack stops charging. 

Over Discharge  

When the discharging voltage of integrated power pack is lower than 18V±0.5V,or when the voltage of any one of battery cell is lower than 2.5V, power pack will shut down automatically. 

Over Current 

The max output instant current of power pack is between 14A and 20A, if over this range, power pack will cut off immediately. When return to normal loading, Power pack can recover after cool down and recharge. 

Short Circuit

Power Pack will cut off at once, when Power Pack short circuit. It will protect the electrical equipment and itself not to be damaged by over current. Power pack can recover once faulty released and charge in advance. 

LED LIGHTS – USB – TOUCH SENSOR BUTTONS?

No battery is going to last long when the LED is glowing 24/7. Same as leaving your car lights on! You’d be charging it daily. This includes backlit switches. They have LEDS too. 1 x battery is required per electrical recliner to maintain the warranty.

Touch sensor buttons draw an continuous current. A very small amount but enough to drain the battery quicker then a standard switch.


Additional information

Weight 1 kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

To install this battery pack, simply disconnect the 0l extension lead from your current power supply and plug this in. Thats the lead that runs to the chair from the power supply.
To charge the battery pack, The Li-Ion charges as the chair is used or will chime when the battery is running low when using an off the grid situation. The standard recliner power supply is all that is need to recharge the power pack


Lithium Battery Specifications

Input:
DC 24V – 35V
Output:
DC 21V – 29V = 3.0amp
Plug:
STD 01 female ( O l Plug)
Capacity:
2550mAh
Cycle:
Up to 300 Cycles per charge
Size:
140mm x 70mm x 40mm
Mountable:
Slide mount included

Product FAQ's

No unfortunately. Pegar handles have been obsolete for many years and we don’t stock any cables suitable.
Recliner springs are measured by the overall length. You’ll find a break down of each recliner spring on each of the products pages. Simply click or tap on the “Measuring” tab.
No. There is only 1 colour brown available worldwide. There is no choice what shade of brown it is sorry.
Yes. There can be a couple mm tolerances in the measurements given.

Yes. Converted to millimetres is 110mm x 70mm.

You need to remove the trigger and cable from the recliner, disconnect the cable from the handle and use the Cable Cheat Sheet that is on the website.
Click or Tap on the “Measuring” tab on the products page and follow the Cable Cheat Sheet to measure your cable correctly. Make sure you disconnect your cable from the handle before measuring. If you cable has broken the barrel off of the end, simply add that measurement, 3.5 or 6mm to the overall length measurement.

Yes you may click and collect. Best you email prior to make sure someone is in. Cash Only or order online and select “Pick Up From Coolum Beach” during checkout.

Don’t see your question? Read our full FAQ’s here.

You may also like...