okin sp2-b power supply
power recliner 2 pin lead showing plugs
Okin SP2-B Power Supply
Power Recliner 2 Pin Lead

Okin SP2-B Power Supply

okin sp2-b power supply

Okin SP2-B Power Supply

From: $61.90

In stock
5 out of 5
5 customer reviews|Add a review

From: $61.90

Okin SP2-B Power Supply

Genuine Okin SP2-B power supply is compatible with the Kaidi KDDYOO1B power supply. This lift chair recliner power supply can also be used on the electric recliner chairs, has a two pins – the “O l” flat blade / round pin plug and takes the figure 8 power cord as standard and has provisions for 2 x 9volt batteries – not included.

ALL of our electrical items are “C” Tick Approved and Meet Australian Standards.

The SP2-B and the SP2-B1 are all the same specifications.

Buy Genuine Okin Parts From CouchGuard®

SKU: OKIN-SP2-B- Categories: , Tags: , , , Brand: okin logo phoenix mecanoOkin
Clear

Description

Okin SP2-B Power Supply has an input voltage is 100-240VAC 50/60HZ and the output is 29v DC 2.0 amp and the two pin plug is the industry standard and fit 99.9% of the recliners on the market.

The 9v battery back up option is generally good for one use only then the batteries need replacing.

 

Additional information

Weight 0.400 kg
Power Supply - Options

, , ,

5 reviews for Okin SP2-B Power Supply

  1. 5 out of 5

    Mark Pendlebury (verified owner) –

    My order arrived today, and I just wanted to thank you for your prompt service and me actually being able to source parts for my electric lift chair that I thought would probably end up being replaced. Great job and thanks again.

  2. 5 out of 5

    Ian English (verified owner) –

    Purchased a new transformer from CouchGuard for lift chair for my elderly mother in law and hey presto the chair worked again! No need to purchase a whole new chair. (To test to see if you need a new transformer place back up batteries In motor. If the chair works you just need transformer and not a new motor. )

  3. 5 out of 5

    Faikah Behardien –

    Just wanted to say thanks for your quick response. The replacement transformer was exactly what we needed.

  4. 5 out of 5

    Arnold Sushames (verified owner) –

    I would like to take this opportunity to congratulate and thank you for the best service I’ve had for many years.
    My order arrived today, has been installed and working wonderfully.

  5. 5 out of 5

    Des Wing (verified owner) –

    Great service.
    Was expecting my part to arrive on the 3rd of January and it came on 28th Dec. Made my wife and our little dog happy to have her recliner fixed in such quick time.
    Thanks Tim.

Only logged in customers who have purchased this product may leave a review.

A. The KDDY022 uses the 6pin adaptor plus seperate charger to charge. This is because these batteries are generally mounted up under the recliner. The KDDY022A uses the recliners original power supply to charge.

A. Yes. You just need to edge the motor out to the desired length then fit the remaining clevis pin.

Yes. We have made this kit universal so makes and models don't come into play as you are replacing the complete electrics with the latest on the market. Just check the overall length of the motor is no shorter then ours.

The Okin Battery Pack 1800 is designed for an inline back up. This means it connects between the power supply now and the chair. Power goes out, you wouldn’t even know it, even with the LED and USB connected. This battery pack is still the best option if you’r planning on using it a s standalone unit and would last up to 3 months before charging is required with NO LED.
Both are not suitable IF you’r planning on using them as  a standalone power source.
No battery is going to last long when the LED is glowing 24/7. Same as leaving your car lights on! You’d be charging it daily.

No. The 1800mAh Power Pack has an inbuilt charging board which means you use you standard recliner power supply to charge it. The 1300mAh comes with its own seperate charger.

Yes. All recliner chair motors are 24V or 25V and use the 29V power supply.

These plugs are worldwide, industry standard 0l plugs. One size. When you look at the male plug end it looks like zero (O) and a one ( l ) hence why its called the oh one plug.

All you need is one of our battery back up for power recliners. We have two options. The best option is the 1800mAh Battery Pack which is an inline solution. Always on charge and kicks in automatically when the power goes out.

View More

Removing & Fitting General Electrical Components

1  Place a drop sheet or old towels around the recliner.
2 Turn off and remove the power supply plug from the mains.
3 Gently turn the recliner over onto its side or on its back. Remember correct lifting
methods.
4 Locate the component and its lead. Follow the lead along to the plug end remembering where it runs.
5 Using a pair of side cutters, snip the cable ties that are retaining the lead
to the frame.
6 Unplug the socket and remove the old component. Place the new component lead along the same path as the old and cable tie the new lead to the frame.
7 Check all other leads are out of the way of moving parts.
8 Turn the recliner back over to normal seating position
9 Plug the main power supply back into the wall.
10 Test the new component. Operate the lift chair recliner to its fullest position
and check that all the leads are clear and not stretched.
11 Return the lift chair to its normal seating position.

Tip: Check that all the leads are cable tied away from moving parts before
turning the power supply back on. Leads can sometimes get jammed between
moving parts causing a dead short after the chair is moved.
DO NOT exceed more then 2 mins operating time at anyone time. If you do
exceed this time, wait 20 mins before using again.

Power Supply Specifications

Input: 100 - 240V, 50/60Hz, 1.5amp (Australian figure 8 mains power cord)
Output: DC 29V = 2.0amp
Plug: STD 01 female ( O l Plug)
Duty cycle: Max 10%; Max Time on: 2 min

This is the industry standard power supply for power recliner chairs including lift chairs.

You may also like…