TiMotion TA5P-1015-002 Actuator

FREE Postage On This Item
Not rated yet

Genuine TiMotion TA5P-1015-002 actuator which is generally found in the Lazy Boy branded electric recliner chairs.

Buy Genuine TiMotion La-Z-Boy Parts From CouchGuard®

  • $275.00
Only 1 left in stock
FREE Postage On This Item

Genuine TiMotion TA5P-1015-002 actuator which is generally found in the Lazy Boy branded electric recliner chairs.

TiMOTION has earned a strong reputation for providing high-quality home furniture actuators. Powered by a low-voltage DC motor, an electric recliner linear actuator effectively harnesses its rotational motion, helping a piece of furniture like a recliner, sofa, or comfort bed move in various ways such as lifting, tilting, pulling, and pushing.

    • Weight
      3.1 kg
    • SKU
  • Options
  • Brand
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment


Q. The motor in my lift chair measures 400mm. Will this kit still fit?

A. Yes. You just need to edge the motor out to the desired length then fit the remaining clevis pin.

Q. The stroke on my motor is 207mm?

A. Thats fine. Our motor will still fit ok.

We have a Pride lift chair that the motor has stopped working in. Will this kit fit?

Yes. We have made this kit universal so makes and models don't come into play as you are replacing the complete electrics with the latest on the market. Just check the overall length of the motor is no shorter then ours.

Removing & Fitting A Actuator

General Instructions Only

1 Place a drop sheet or old towels around the recliner.

2 Turn off and remove the power supply plug from the mains.

3 Gently turn the recliner over onto its side or on its back. Remember correct lifting methods.

4 Locate the component and its lead. Follow the lead along to the plug ends remembering where it runs.

5 Using a pair of side cutters, snip the cable ties that are retaining the lead to the frame.

6 Loctate the two mounting pins and clips that hold the motor to the frame. Remove the wire retaining clips from the pins using a pair of pointy noise pliars. Hold the motor and remove the pins.

7 Place the new motor assmebly into position. Replace the pins through the mounting holes and attach the wire clips.

8 Plug in all leads and run them along the frame. Check that all leads are out of the way of moving parts. Cable tie the leads back to the frame.

9 Turn the recliner back over to normal seating position

10 Plug the main power supply back into the wall.

11 Test the new component. Operate the lift chair recliner to its fullest position and check that all the leads are clear and not stretched.

12 Return the lift chair to its normal seating position.

Tip: Check that all the leads are cable tied away from moving parts before turning the power supply back on. Leads can sometimes get jammed between moving parts causing a dead short after the chair is moved.

DO NOT exceed more then 2 mins operating time at anyone time.

If you do exceed this time, wait 20 mins before using again.

Related products

Customers who viewed this product bought